🎥 IP Driver for Sony Bravia TVs

 

This video shows you how to install the Sony Bravia IP driver with AVA OS for control with AVA OS


 

Transcript

Demo Section

Start with the normal Add Device step.

Enter Sony IP to quickly find the driver.

This next screen is vital to your success. Read it.

It tells you how to configure the Sony TV so that it can be controlled.

If you don’t verify each item here, AVA OS won’t be able to control the TV…

or even find it on the network.

But if you have the TV correctly configured and its on the same network as the AVA system…

Ta-dah! The driver presents you with the available TVs, using the friendly names you have assigned to them.

Pick your TV.

Then assign it to a room.

Summary

And the Sony TV is now added.

Watch the “First Setup” video if you’re not familiar with what to do after adding the TV.

18164898439709